The USS Enterprise (Refit) from Star Trek: The Motion Picture

Build Log:  Part 12 Okay, everyone, I did some fun stuff in the last couple of weeks – some was dirt simple and pretty, some was a little harder and is coming out really great. First off, let’s bid a fond “see you soon” to the engine nacelles – I’ve trimmed them out and packed […]

The USS Enterprise (Refit) from Star Trek: The Motion Picture

Build Log – Part 11 It’s been a while since I’ve written this log, so my apologies go out to anyone who’s been waiting…hope it wasn’t too long. When last we were here, the nacelles had just been wired, all the internals were light-blocked and fixed in place, and the nacelles were finally sealed up.  […]

AMT’s “Cadet Series” – Star Trek: The Motion Picture Set – Part 2

Welcome to Part 2, where I’ll cover the decaling and painting of the AMT Cadet Series of Star Trek: The Motion Picture.  For those of you just tuning in, take a few moments and have a look at what I put up on the kit itself and its assembly, because there’s a lot of good […]

Kit Review: AMT’s “Cadet Series” – Star Trek: The Motion Picture Set

Hello everyone!  This entry is a first for me – a sponsored kit review on behalf of a hobby vendor.  I’m doing periodic reviews for the company Models4Hobby.co.uk, and they’ve sent me this kit for review and build.  A copy of this review will also appear on their site.  I’m adding this note here in […]

The USS Enterprise (Refit) from Star Trek: The Motion Picture

Build Log – Part 10 Before I begin – Post-note to the prior bit on painting the grilles:  somewhere along the line, I seem to have acquired a roll of 1mm masking tape, which works great on the inboard grille trenches (assuming it can go on straight, which is a bit of a challenge). Now it’s time […]

The USS Enterprise (Refit) from Star Trek: The Motion Picture

Build Log – Part 9 All righty!  More work on the engine nacelles – and their internal wiring. First off I want to sing the praises of that Vallejo surface primer again – it’s been really excellent to work with.  Dries extremely smooth, lays flat, and is rather forgiving of when I “overdo” it.  I […]